---
title: "Set-top Box Guide for IPTV"
description: "***Available for VDSL & Fibre based Customers*** ![](https://nexicom.net/wp-content/uploads/2025/05/image-17.png) PVR & basic set top box by Amino ## Menubar The Menubar provides quick access to the TV Guide, Digital Video Recorder (DVR), Recordings, Settings, Favorites and Search. ![](https://nexicom.net/wp-content/uploads/2025/05/image.png) **TV**: Launch the…"
url: "https://www.1000island.net/docs/set-top-box-guide-for-iptv/"
updated: "2026-04-24"
category: TV
---

# Set-top Box Guide for IPTV

***Available for VDSL & Fibre based Customers***

![](https://nexicom.net/wp-content/uploads/2025/05/image-17.png)

PVR & basic set top box by Amino

## Menubar

The Menubar provides quick access to the TV Guide, Digital Video Recorder (DVR), Recordings, Settings, Favorites and Search.

![](https://nexicom.net/wp-content/uploads/2025/05/image.png)

**TV**: Launch the interactive program guide

**Recordings**: Watch, edit, and create DVR recordings (only functioning on STBs with DVR capabilities)

**Home**: Access Settings for Channel Blocking, Parental Controls, and Hardware, Favourites lists.

**Search**: Find your favorite programs by title or key word

**To Access the Menubar:**

1. Press Menu on your remote control.

2. Press the Up/Down, Left/Right buttons on your remote control to navigate the highlight through the Menu.

3. Press OK to activate that highlighted selection.

4. Press Exit to leave the Menu.

__________

## **Guide**

![](https://nexicom.net/wp-content/uploads/2025/05/image-1.png)

You can access the **Guide** two ways. Press the **Guide** button on your remote control. Continuing to press the **Guide** button will switch the Guides to**All** or **Favorites**. You can also access the **Guide** by pressing the **Menu** button on your remote control, navigating to the **TV** icon on the left of the screen, and pressing **OK**. Once you are in the Guide, the program you are currently watching remains in the upper-left corner of your screen.

***Note****: The name of the Guide appears on the left side of the Guide below the current program mini screen. If you can only scroll through a limited number of channels, verify that your Guide is set to All or Subscribed.*

Some Symbols Used On the Guide You may see these symbols on the Interactive Program Guide:

![](https://nexicom.net/wp-content/uploads/2025/05/image-18.png)

## **Navigate the Guide**

There are a few different ways to navigate the Guide.

1. a) Tune to a channel on the **Guide** by entering the channel number and pressing **OK**.

b) Or, press the **Guide** button and use the arrow buttons on the remote to move the highlight through the **Guide**, channel by channel.

2. Press the **Left** or **Right** arrows to move the highlight through the **Guide** to view what programs are showing in the past or future. You can view Guide date for programs up to 7 days into the future.

3. Press the **Page Up/Page Down** buttons to move through the **Guide** page by page.

4. Press OK to preview a highlighted show on the **Guide** in the upper-left corner of your TV screen. To tune to the channel, press OK again.

5. Press Exit on the remote to leave the **Guide** or repeatedly press the **Guide** button on your remote to cycle through all of the available **Guides** and it will disappear.

*Tip: Press **Back** on your controller while watching a show to open the Recently Watched menu which will show you the last programs you watched. You can tune to a particular program by highlighting the appropriate box and pressing OK.*

## Closed Captioning

![](https://nexicom.net/wp-content/uploads/2025/05/image-19.png)

Click the “CC” button on the lower right side of the remote. It will bring up the following display on the screen.

![](https://nexicom.net/wp-content/uploads/2025/05/image-20.png)

Though there are a handful of CC options, only “Analog CC 1” & “Digital CC 1” will display proper closed captioning. If you miss the option, you can continue to hit the button to go back through the list. To turn off the feature, click the CC button until it displays “CC Off”. To see if the channel itself supports closed captioning (not all do) hit the info button and look for a white icon showing “CC”. If no icon displayed then no closed captioning is available for this channel.

## **Reminder & Autotune Timers**

You can set timers to remind you of the programs you want to watch. A Reminder tells the system you want it to let you know a program is about to come on. An Auto Tune will automatically change to the correct channel when the program is about to start.

![](https://nexicom.net/wp-content/uploads/2025/05/image-3.png)

**Setting a Reminder Timer**

1. Press the Guide button on the remote control.

2. Navigate to future programs by using the arrow buttons on the remote to move the highlight through the Guide. Press OK on the program that you want to set the reminder for. Select the “Set Reminder” symbol.

3. Press Exit to return to watching TV.

4. A clock symbol on the program on the Guide indicates that a Reminder Timer is set.

![](https://nexicom.net/wp-content/uploads/2025/05/image-4.png)

A **Reminder Timer** message will appear on your screen reminding you of the program just before it begins. Press **Info** to view the **Reminder** or press **Cancel** to exit out of the **Reminder**. When you press **Info** on the **Reminder** message, press **OK** on the program name to tune to the program. To cancel the reminder simply click the same alarm clock image which now has a small “X”.

![](https://nexicom.net/wp-content/uploads/2025/05/image-5.png)

**Setting an Autotune Timer**

1. Press the Guide button on the remote control.

2. Navigate to future programs by using the arrow buttons on the remote to move the highlight through the Guide. Press OK on the program that you want to set the timer for. Select the “Set Autotune” symbol.

3. Press Exit to return to watching TV.

4. The Autotune symbol on the program on the Guide indicates that Autotune has been set.

![](https://nexicom.net/wp-content/uploads/2025/05/image-6.png)

Before the program begins, an alert icon will appear on your screen giving you the option to tune in or **Cancel**. You can edit the **Autotune Alert Timer** notification to **0 seconds** <default>, **30 seconds, 2 minutes** or **5 minutes** through **Settings** on the **Menubar.**

**Cancelling an Autotune Timer**

![](https://nexicom.net/wp-content/uploads/2025/05/image-7.png)

1. Press the Guide button on the remote control.

2. Navigate to the program you have set an Autotune Timer for by using the arrow buttons on the remote to move the highlight through the Guide. Press OK on the program. Select the “Cancel Autotune” symbol.

## **Infobar**

The InfoBar provides quick access to information about the programs that are on now or will be on in the future.

![](https://nexicom.net/wp-content/uploads/2025/05/image-8.png)

**You can access the Infobar three ways:**

1. Press **Info** on your remote control. Press **Info** again to display a more detailed program description.
2. Press the **Up/Down** buttons on your remote control.
3. When changing channels, the **Infobar** will appear automatically.

**Navigate Using the Infobar**

When the Infobar is present on the screen, you can perform the following actions without leaving the channel you are on.

a.  Press OK on the remote to **Record Program**, **Record Series**, or **Expand Info** for the current program you are viewing.

b. Navigate to other channels by pressing the **Up/Down** arrows and press **OK** to tune to that channel.

c. Navigate to future programs by pressing the **Left/Right** arrows. Press **OK** while viewing the Infobar for a future program to: **Schedule Event, Record Program, Record Series, Set Reminder, Set Autotune**, and **Expand Info**. Use the arrow buttons on the remote to move the highlight through the actions and press **OK** to select.

## **DVR – Digital Video Recording\***

With DVR, you can easily record the programs you want to watch and then view them whenever it’s convenient for you. Plus, a DVR lets you pause, rewind, and replay the action during live TV.

## **Using your Whole Home DVR**

You have three video streams to record and watch on your main DVR box. You can watch one channel and record two shows or record one and watch two recordings from anywhere in your home.

**Record Live TV\***

Record the show you are watching by pressing the Record button. The show will be recorded until it is scheduled to finish. To manually stop the recording before it is scheduled to finish, press **Stop**.

**Record from Guide\***

Use the **Guide** to navigate to the show you want to record. Press the **Record** icon button on your remote control to record the show.

**Record by Search\***

a. Navigate to the **Menubar** by pressing the **Menu** button, highlighting the **Search**icon, and pressing **OK**.

b. Press **OK** again to launch the on-screen keyboard and enter the first four letters of a show’s title. Press **Done**.

c.  Arrow **Down** and highlight **Search Guide** and press **OK**. Select **Extended** and press **OK**.

d. Navigate to the program you want to record, highlight it, and press **OK**.

e. Arrow **Down** to **Record Program** for a one-time recording and press **OK**. Or arrow **Down** and highlight **Record Series** to record all episodes of the show.

**View Recordings\***

![](https://nexicom.net/wp-content/uploads/2025/05/image-9.png)

a. Press the **DVR** button on your remote control to launch the **DVR** menu.

b. Navigate to the show you want to view and press **OK**.

c. **Play Recording** will be highlighted, press **OK** again to view the show.

d. Press **Fast Forward** to advance the program. Press **Fast Forward** repeatedly to change the fast forward speed by 2, 4, 10, or 25 times. **Rapid Fast Forwa**rd will advance the program 30 seconds.

e. Press **Rewind** to reverse the program. Press **Rewind** repeatedly to change the fast forward speed.

**Delete Recordings**

1. Press the Menu button on your remote control. Use the down arrow key to navigate to the Recordings option and navigate to the right screen.

2. Navigate to the show or series you want to delete in your Recordings and press OK. Use the Delete Recording or Delete All buttons to delete a particular episode or a whole series of episodes. Press YES to confirm.

**Cancel an Upcoming Show Recording**

You can cancel an upcoming recording of a show by selecting the show in the Recordings menu or on the guide and pressing the Cancel Recording button. Then press Yes to confirm.

**Create a Series Recording\***

1. Use the Guide or Search function on the Home Screen to navigate to a show you want to record. Highlight the show and press OK.
2. Highlight the Record Series button and press OK.
3. The pop-up menu allows you to choose if you want to record All or New Only episodes to skip re-runs. The Limit-To section allows you to set the maximum number of saved recordings for the series. Once past this number, it will start deleting old recordings.
4. To edit a series recording, click on an episode of the recorded show and press OK. Highlight the Edit Series Recording button to change your recording options

**Cancel a Series Recording**

1. To cancel a series recordings, navigate to a single episode or the entire series through your Recordings menu, and press OK.
2. Highlight and press the Cancel Series Recording button and press Yes.

**Control Live TV\***

a.  Press **Pause** on your remote control to pause the program. Programs can be paused for up to 30 minutes as long as the current channel is not changed.

b. To resume watching the program, press **Play**.

c. Press **Rewind** to reverse live TV or a recorded program.

d. Press **Rewind** repeatedly to change the rewind speed by 2, 15, 50, or 300 times. Follow the same process to **Fast Forward** live TV that has been paused.

e. Press **Stop** on your remote control to return to Live TV

## **Settings **

The Settings menu enables you to set viewing and hardware preferences for your

TV service. You can change the settings for **Parental Controls**and **Favourites**.

This is where you also go to adjust your audio, video, and caption settings and to reboot your digital box.

![](https://nexicom.net/wp-content/uploads/2025/05/image-21.png)

**To access Settings**

1. Press Menu on your remote control, navigate the highlight down to Settings and press OK.

2. From here you can select general settings under Preferences, user information under Users, Hardware Settings, or change your device name with Other Settings.

3. You must input your pin (defaults to 1234 unless otherwise changed) to access each of these Settings menus.

**Parental Controls**

To offer parents more control over the programming and content their children can access, Parental Controls enable parents to selectively block programming by channel or rating.

\*only applicable for STB with DVR capabilities

![](https://nexicom.net/wp-content/uploads/2025/05/image-12.png)

***Note****: Parental Controls will not appear until you have created Parental Control in Settings.*

**Enable Parental Controls**

a. Press **Menu** on your remote control, navigate the highlight to **Settings** and press **OK** on the remote control.

b. Enter your account password and press **OK**.

c. Under **Preferences**, navigate the highlight to **Parental Control**, press **OK** to check the box, navigate the highlight to **Submit** and press **OK**.

**Modify Parental Controls Settings**

a. Navigate back to **Settings** and enter your account password. Arrow **Down** to **Users** and press **OK**. Arrow **Down** and highlight **Users**, press **OK**.

b. Arrow **Right** and highlight **Parental Control**, press **OK**.

c. Arrow **Right** and **Up/Down** to check the controls you want to activate for your family. Once you have finished your selections, arrow **Down** to **Submit**, and press **OK**.

d. Press **Exit** on your remote control to leave **Settings**.

## **Channel Blocking**

Channel Blocking enables or disables the list of channels you have blocked.

Programs on blocked channels cannot be watched regardless of the rating of the program(s) being shown. To enable or edit **Channel Blocking**, navigate to **Settings**.

**Enable & Edit Channel Blocking**

a.  Click **Preferences** in the **Settings** menu. Arrow **Right** and highlight the check box next to **Channel Blocking**, press **OK**.

b. Arrow **Right** and highlight **Right** to **Edit**, press **OK**.

c. A list of channels included in your package will appear on the right side of the screen. Arrow **Up/Down** through the list and press **OK** on each channel that you want to block. A lock icon will appear to the right.

d. Once you have finished your selections, arrow **Right** to **Update**, and press **OK**.

e. Arrow **Down** and highlight **Submit**, press **OK**.

## Users

1. Press Menu on your remote control, navigate the highlight down to Settings and over to Users. Enter your pin (defaults to 1234 unless otherwise changed in User settings) and press OK.

2. Navigate down and highlight Add and press OK.

3. Enter the information in the appropriate boxes using the on-screen keyboard and numbers on your remote control.

 4. Navigate down to Continue and press OK. 5. Enter the Parental Control for this User. 6. When done, highlight Submit and press OK. A new user will be added to your list of Users.

**Logging in as Another User**

1. Press Menu on your remote control, navigate the highlight down to 14 Settings and over to Sign Out. • Note: this option will only appear if you have more than one user set up in your User settings.

2. Highlight the user you would like to sign in as, enter your pin and press OK.

**Editing User Information**

1. Press Menu on your remote control, navigate the highlight down to Settings and over to Users. Enter your 4-digit pin (1234 unless previously changed) and press OK.

2. Press OK on the circle next to the user you would like to edit.

3. Navigate down and highlight Edit and press OK.

4. Update the information in the appropriate boxes using the on-screen keyboard and numbers on your remote control.

 • Note: To create a new 4-digit PIN, used for accessing Settings and purchasing progamming, enter your current PIN into the “PIN” box, and a new 4-digit PIN in the“New Pin” box.

5. Navigate down to Submit and press OK.

## **Favorites **

It’s easy to enjoy the channels you watch the most with personalized Favorites lists. You can create multiple Favorites lists and quickly change the Guide to display one list in particular.

![](https://nexicom.net/wp-content/uploads/2025/05/image-13.png)

**Create/Edit a Favourites List**

a. Press **Menu** on your remote control, navigate the highlight to Favorites, and press **OK** on the remote control.

b. Arrow **Down**, highlight **Create**, and press **OK**.

c.  With the name highlighted at the top, press **OK** again to edit your favorites name. Navigate the highlight to **Clear**, next use the **Up/Down/Left/Right** arrows to highlight the letters on the on-screen keyboard to enter the name of the list.

d.  Navigate the highlight to **Done** and press **OK**.

e. Arrow **Up/Down** to select the channels you want to add to your list. Highlight the channel, press **OK** on the remote control, and the favorites icon will appear on the right of the channel you select. Continue to add or remove channels from your favourites lists by repeating these steps.

f.   When you are finished making your selections, arrow **Right**, highlight **Update**, and press **OK**.

![](https://nexicom.net/wp-content/uploads/2025/05/image-22.png)

Now you can view only your favorite channels in the Interactive Guide. Repeatedly press **Guide** on your remote control to cycle through your favourites lists. Once you have cycled through all favorites lists the Guide will exit.

**Delete a Favorites List**

a. Press **Menu** on your remote control, navigate the highlight to Favorites, and press **OK** on the remote control.

b. Arrow **Down**, highlight **Delete**, and press **OK**.

c.  Arrow **Up/Down** to select the favorite list to delete and press **OK** to highlight the list. Navigate the highlight Down to OK, and press OK on your remote control.

d. A box will appear asking you to confirm that you want to delete the selected favorites list. Highlight **Yes** to delete or **No** to **Cancel**, and press **OK**.

## **Search **

Search for a word across the Guide and DVR system.

![](https://nexicom.net/wp-content/uploads/2025/05/image-15.png)

**To Search**

a. Press **Menu** on your remote control, navigate the highlight to **Search**, and press **OK** on the remote control.

b. The **Enter Text** box is highlighted. Press **OK**.

c. Use the **Up/Down/Left/Right** arrows to highlight the letters on the on-screen keyboard to enter the search keyword. The fewer letters used in the search, the better chance you have of finding what you want.

d. Navigate the highlight to **Done** and press **OK**.

e. Arrow **Down** so Search is highlighted and press **OK**.

f.  The search results in order appear on the right side of the screen. Navigate the highlight to the list and press **OK** to:

Tune to a program if it is currently on. *OR*The **Menu** will appear that will enable you to **Schedule Event, Record Program, Set Reminder, Set Autotune,** and view **Expanded Info** for the program you highlighted. Arrow **Down** and highlight the command or highlight **Cancel** and press **OK** to return to the search results.