---
title: Linksys E3000 Router Connection Setup
description: "*Note: Before proceeding with this setup, ensure your Lansdowne equipment is connected to the **In****ternet** or **WAN** port on your Linksys router via an Ethernet cord. Also ensure that your computer is connected to your Linksys router (preferably by an Ethernet…"
url: "https://www.1000island.net/docs/connection-setup-on-linksys-router/"
updated: "2026-04-15"
category: Internet
---

# Linksys E3000 Router Connection Setup

*Note: Before proceeding with this setup, ensure your Lansdowne equipment is connected to the **In****ternet** or **WAN** port on your Linksys router via an Ethernet cord. Also ensure that your computer is connected to your Linksys router (preferably by an Ethernet cord)*.

1. Open your Internet browser.
*Note: Internet Explorer was used for the purposes of this instructional document but any web browser will work (Mozilla Firefox, Google Chrome, Safari, etc.)*

![](https://nexicom.net/wp-content/uploads/2025/05/step22-1.jpg)

2. In the address bar, type **192.168.1.1** and press **Enter**.

*Note: 192.168.1.1 is the most common address for Linksys routers, if this does not work consult your router documentation to find the proper address.*

![](https://nexicom.net/wp-content/uploads/2025/05/step33.jpg)

3. Type **admin **in both the username and the password boxes. Click **OK.**

*Note: This is the default information for most Linksys routers, if this information does not work please consult your router documentation to find the proper information.*

![](https://nexicom.net/wp-content/uploads/2025/05/step43.jpg)

4. You may get a pop up window similar to the one above. If so, click the **OK** button.

If you don’t see a pop up window like this, move on to the next step.

[![](https://nexicom.net/wp-content/uploads/2025/05/step53.jpg)](https://kb.Lansdowne.net/wp-content/uploads/2013/11/step53.jpg)

5. Select **PPPoE **from the drop down box labeled **Internet Connection Type**.

![](https://nexicom.net/wp-content/uploads/2025/05/step62.jpg)

6. Fill in the fields with the corresponding information:

- **Username** – Your full Lansdowne username (This must include **@Lansdowne.net**)
- **Password** – Your Lansdowne password

![](https://nexicom.net/wp-content/uploads/2025/05/step73.jpg)

7. Scroll to the bottom of the screen and click on the **Save Settings** button.

![](https://nexicom.net/wp-content/uploads/2025/05/step82.jpg)

8. You will now see a window that says **Settings are successful.** Your connection information has now been successfully entered into your Linksys router.

*Note: The above walkthrough is for a basic Internet connection setup on a Linksys router. This will not set up or secure your wireless connection. The screens above may differ from the screens you see depending on the model of Linksys router you have. If you have any difficulty in this setup or require assistance in setting up or securing your wireless connection, consult your router documentation and/or contact the manufacturer.*